SDSU Extension offer watering options for your garden
BROOKINGS -- Thanks to the rain this growing season has been a vast improvement over last year's drought for most gardeners, said David Graper, Extension horticulture specialist and director of McCrory Gardens.
"Granted, sometimes we received too much rain at one time but I think that is better than almost no rain at all," he said.
However, even in a year with normal rainfall, Graper pointed out that most people will have to water their gardens at least once in a while to get them through the dry periods and therefore have better production.
There are lots of ways to water the plants in your garden. Some of the most popular utilize oscillating sprinklers that apply water over a pattern that you can select on the sprinkler, impact sprinklers that spray water over a selected radius or full circle and spot sprinklers that spray water over a small area.
"All of these can work well but also have a few disadvantages," he said.
First of all, Graper said they all spray water over head, up into the air, and whenever water is sprayed in the air, there is the potential to lose a significant amount of it to evaporation before reaching plants. Secondly, he said gardeners often fight against one of the common aspects of living on the Great Plains -- wind.
"The wind may blow the water away from where you want it to go," he said. "If you add these two factors together along with some hot summer temperatures, you might end up with a watering system that is not very efficient at getting the water to where it needs to go -- your plant's roots."
In addition to the first two issues, Graper adds that these methods result in every plant receiving water -- including weeds. And, these methods also require gardeners to frequently move the water source.
"This can be a challenge, especially if you are trying to water a large patch of squash or melons that have covered up the garden space. You also have to be careful to not knock over plants as you drag the hose around. Plus, you have to make sure you get the water up high enough to effectively water a patch of sweet corn that will block most sprinklers unless you put them on a post or a ladder," he said. "Plus, it is usually pretty muddy after watering so you might lose your shoes in the process."
The final issues Graper sees with many of these methods is the issue of plant diseases, particularly foliar and fruit diseases like the various blights on tomatoes.
"In most of these diseases, both caused by bacteria and fungi, splashing water is a common means for the disease to spread," he said. "Also many diseases need wet foliage over several hours to get established on a leaf. If you can keep your plant's foliage dry you will generally have fewer disease problems."
Drip system recommended
A drip system can allow you to water the garden without most of the issues Graper described earlier.
"A drip system is a very efficient watering system. Drip systems offer several advantages over overhead watering. They allow you to get water precisely where it is needed, at the base of plants where roots can take advantage of it," he said.
Along with very little evaporation, a drip system keeps the plant's foliage dry which reduces disease development and spread. And, because it is a more controlled watering method, Graper says gardeners reduce the amount of water in between the rows of vegetables, resulting in fewer weeds to pull.
"And, since most drip systems are installed semi-permanently for the growing season, you don't have to drag a hose through your garden as much as you would with a sprinkler system," he said.
Of course Graper said there are some disadvantages too.
"Drip systems can be rather expensive and labor intensive to buy and install, at least at the beginning of the season, but once you have them in place you don't have to move them again, at least until the end of the season," Graper said.
He added that some of these costs will be offset by the savings gardeners will see on your water bill from using less water to keep your garden growing versus overhead irrigation.
If gardeners cannot find the supplies they need locally, he encourages them to look for drip irrigation supplies either online or in a catalog. He reminds gardeners that if they have a drip system installed, they will need to be careful when tilling or digging that they do not damage the line.
Types of drip irrigation systems
There are many types of drip systems available. Graper said the most commonly available type of drip irrigation uses an ooze hose. An ooze hose is a porous hose, often made from recycled tires, that allows water to ooze out of little pores all over the length of the hose, where it then soaks into the soil.
"These are great, inexpensive alternatives to using a sprinkler where you might have a small garden or bed to water or where you may not want to get water sprayed on other things, like your deck, windows or driveway," he said.
Before purchasing, he said gardeners need to check out the package for information on how many hoses you can hook together.
"If you try to attach too many, you may run out of water before the plants at the end of the line can get any," he said.
Flexibility is another benefit of ooze hoses that Graper listed.
"Their flexibility allows you to run the hose along garden rows and around plants very easily," he said.
When choosing an ooze hose, he encourages gardeners to also purchase landscape staples that can be used to hold the ooze hose in place.
"If you have a large garden, you will have to break it down into different zones then connect your garden hose to each zone, allow it to get watered, then move the garden hose to the next set of ooze hoses to water that area," he said.
If you have a larger garden or planting beds around your home or yard, Graper said you might want to invest in drip tubing.
He explained that this tubing often comes with little drip emitters built right into the hose. They are usually spaced out at various intervals, like every 6, 12, 18 or 24 inches. Each emitter will also have a rating of the volume of water that it will emit over the course of an hour, like 0.6 or 0.9 GPH (gallons per hour).
If you have a heavy soil that does not absorb water very quickly you will probably need to look for a lower GPH and also a wider emitter spacing, like every 18 inches to spread the water out and allow the water to soak in without running off. Lower GPH ratings allow you to cover a larger area from a single feeder source, like a garden hose, but you will have to water for a longer period of time to thoroughly water the whole area. There are also little drip emitters that you can install into blank drip line.
"These work particularly well for planting beds with ornamental plants or for watering a squash or melon planting where you planted the seed in hills," he said.
When installing, just lay out the lines where you want them to go and then insert the drippers where plants are located.
"These also come in rated application rates so you can apply more or less water as needed by different plants," he said.
Inline drip irrigation tubing
The inline drip irrigation tubing can be purchased in rolls of 50, 250 or 500 feet. Graper said gardeners just need to get the length they need for their garden or planting bed.
"You can also purchase drip irrigation kits that will include the tubing of your choice as well as the various fittings you will need to lay out your drip line for a garden or planting bed," he said.
One other item he recommends gardeners using an inline drip system to purchase is a filter, particularly if you are using water from your own well.
"Particulates and minerals can build up in your drip line and emitters, as well as in ooze hoses, that will eventually clog them up and make them useless," he said. "So use good clean water when using any of these drip systems."
Another accessory Graper suggests is a water timer to turn the water on and off at a set time so gardeners don't have to worry about forgetting to water or to turn it off when it is done.
End of season care
Drip systems can generally be reused for several years or growing seasons. At the end of the growing season, let the excess water drain out, then pull it out of the garden.
"I coil mine up and store it in my shed for the winter. Then I can till the whole garden at the end of the year, get my garden planted and lay out the drip lines again the next year," Graper said.
If the drip system is installed in a flower or landscape bed, disconnect the drip line from your hose or hose bibb and let the remaining water drain out. Graper said gardeners can also hook up an air compressor to blow the excess out and reduce the chance of lines bursting during the winter.
To learn more visit, iGrow.org.
-Source: iGrow press release